Steel
Steel is a metallic alloy whose major constituent is iron. Carbon steels are the most widely used metallic alloys, but there are many specific alloys used for their specific properties. One classical definition is that steels are iron-carbon alloys with up to 2.1% carbon. Presently there are several classes of steels in which carbon is an undesirable alloying element. Examples are interstitial[?] free steels. A more recent definition is that steels are iron-based alloys that can be plastically formed. The importance of carbon in most steels results from its effect on steel properties and phase transformations. With the increased carbon, steel is harder and has a much higher tensile strength than iron, but is also more brittle. The first steels were probably created accidentally when iron sword blanks were heated in charcoal forges.
While the ferrite allotrope of iron, which is normally what we see as wrought iron, will not absorb much carbon, when heated to a higher temperature it assumes a mostly austenite structure, allowing it to absorb up to 5% carbon and become pig iron. Additional metals are usually added to carbon steel to change its characteristics. Nickel in steel adds to the tensile strength, chromium increases the hardness, and vanadium also increases the hardness while reducing the effects of metal fatigue[?].
After the heating process, the cooling of the steel must be controlled in order to control its crystal structure. This is known as quenching, which converts austenite into varying proportions of martensite, ferrite, cementite and bainite[?]. The steel must be cooled quickly in order to achieve the desired crystal form, but cooling too quickly will cause the metal to crack. Water cools the steel too quickly, so oil is traditionally used.
Types of steel
- Damascus steel, which was famous in ancient times for its flexibility, was created from a number of different materials (some only in traces), essentially a complicated alloy with iron as main component.
- Stainless steels contain a minimum of 10.5% chromium, often combined with nickel, and resist corrosion (rust). Some stainless steels are non-magnetic.
- Tool Steels[?]
- HSLA Steel[?] (High Strength, Low Alloy)
- Alloy steels[?]
- ferrous superalloys[?]
See also: Bessemer process, the first commercial scale steel production process; Steel technical data[?].
Cultural references
Vincent, and extending to the southward, to the shore of
to the knowledge previously possessed of the interior.
His former expedition ascertained the fate of the rivers Macquarie and
every reason to believe, is, in ordinary seasons, of considerable
above-mentioned, as uniting with the "Murray," the existence of an
the northward of "Mount Harris," down to the southern coast of the colony.html">colony,
examination of the lake, (which has been called "Alexandrina"), as the
that a more practicable and useful communication may be discovered in
colony by Captain Sturt, is as gratifying to the government which directed
conducted it to its termination.--It is an additional cause of
has a claim to a proportionate degree of applause. All were exposed alike
manifesting the most anxious desire for the success of the expedition.
example was so important, could not fail to have the most salutary effect;
the highest praise.
By his Excellency's command,
ALEXANDER M'LEAY.
BANKS OF THE MORUMBIDGEE, APRIL 20TH, 1830.
SIR,--The departure of Mr. George M'Leay for Sydney, who is anxious to
opportunity than would otherwise have presented itself, by which to.
On
wordlookup.net
All is still licensed under the GNU FDL.
It uses material from the wikipedia.
|
|